Subscribe

RSS Feed (xml)

Powered By

Skin Design:
Free Blogger Skins

Powered by Blogger

Thursday 26 May 2011

How To Set Up A Calcium Reactor In Your Aquarium


This is why calcium reactors are so important that it is used in aquariums. These reactors can produce calcium calcium in the tank continuously for the required level of precision so that the optimal conditions maintained. Calcium reactors will use carbon dioxide that is given off as a waste product into the tank and generate calcium, which can be useful in several ways for the inhabitants of the aquarium.

the following two important ways in which calcium reactors have become essential for the aquarium.

    the most prominent advantage of using a calcium reactor is that they maintain the pH value of water. pH value of water must be maintained in a neutral state, but if the level changes, then the water can become too acidic or too alkaline for the inhabitants of the tank. When calcium is released into the water, calcium reactors, it helps to stabilize the pH value and maintain it at optimal levels. algae that live in aquariums play an important role in the ecosystem of the closed container. They are useful for food of organisms in your reef tank. For example, some of these algae can help corals in your tank with your diet, creating mutual benefit relationship with them. However, algae, particularly algae that grow on corals, require calcium to survive. Calcium reactors to help meet this need.
Setting up the aquarium calcium reactor is very simple, and you can do it yourself referring to the DIY guide. Calcium reactors are set to assemble several components. Here is a list of the different components that must be made​​: -

    Carbon dioxide cylinder - Carbon dioxide is available in pressurized cylinders. It is present in refillable bottles. It is attached sheets for the aquarium, so you do not accidentally fall. Calcium carbonate medium - the medium is kept within the calcium reactor and it gets dissolved in the tank. dissolution is controlled by pH values ​​that are placed inside reactors. These calcium carbonate media are different compounds that contain CaCO-3 in them, such as calcite, for example. They slowly allowed to dissolve in a mailbox. solenoid valve - electromagnetic valve as a switch that is used to allow carbon dioxide flux in a reactor. It is usually connected between the cylinder of carbon dioxide and the main reactor. Another way the merger is to attach it to the pH controller, and then put the probe into a reactor. pumps - will have to pump water into the reactor feed. attaching the pump will depend on the type, but the pump connection must be such that proper circulation of water takes place in reactor.

No comments:

Post a Comment